Ordinary PCI-E X16 Card Installation PCI-E X1 Slot: Guide
When it comes to creating and upgrading your computer components, choosing the right hardware can be a frightening task. One common misconception is that you need a huge amount of space to include complex graphics cards in the PCI-E X16 slot, such as Nvidia GeForce or AMD Radeon R9 series. However, with the right knowledge and tools, you can successfully include a regular PCI-E X16 card (such as R9 280x) PCI-E X1 slot.
Understanding PCI-E Maps
Before we go into the PCIE X16 card customization of the X1 slot, let’s clarify some concepts:
* PCIE : The peripheral component of the interconnection express standard is used to connect the peripherals and devices to the motherboard.
* X16 (or PCIE 3.0) : A high -speed expansion card that uses a single bandwidth band. This is what we need to fit into our X1 slot.
* X1 : A low -speed expansion bus usually found in older motherboards or smaller systems.
Setting a common PCI-E x16 card
For a regular PCI-E X16 map (eg R9 280X) falls in the X1 slot, you will need:
1
PCIE-X16 Adapter : A specialized adapter that tilts the PCIE X16 bar on your motherboard with X1 slot in your system.
- X1 to PCIE-X16 Bridge : Usually it is a small, passive component that converts the X1 signal to the 8 lanes (or more) PCI-E card.
These adapters and bridges are available online from different manufacturers such as:
- Kingston
- Corsair
- ASUS
- Msi
How to choose the right adapter
When choosing an adapter, consider the following factors:
* PCIE X16 Support : Make sure the adapter supports PCIE X16 lanes.
* X1 Compatibility : Check that the adapter is compatible with your system X1 slot (the most advanced motherboard is 4 contact headers X1).
* Power Requirements
: Some adapters may need additional power, so make sure you are aware of all the additional cables or components you need.
Installation and check
To install the adapter:
- Install the PCIE-X16 bridge available.
- Connect the adapter to the motherboard PCIE port using the provided cable.
- System feeding with both the X1 slot and the PCIE-X16 bridge.
Check the setup by adding a compatible graphics card (R9 280x) from the PCIE X16 lane and check that it recognizes your operating system.
Conclusion
The usual PCI-E X16 card is required for the X1 slot requires some creativity and specialized components. When choosing the right adapter and doing these steps, you should be able to successfully install the graphics card in a compatible case. Before making your purchase, remember to always double check your compatibility and a happy building!
Leave a Reply